SHURE PORTABLE WIRELESS SYSTEM CAMERA MOUNT RECEIVER VHF 175MHZ MIC HOT-SHOE NOS

Description

SHURE VP PORTABLE
WIRELESS SYSTEM
CAMERA MOUNT MIC RECEIVER KIT
175.000MHZ NEW OLD STOCK
*RECEIVER ONLY NO MIC INCLUDED*
These SHURE Model VP3 Receivers were purchased in a bulk lot of US Government/Military Surplus.  They are all factory set to 175.000MHZ Frequency, and all appear to be Unused New Old Stock.  We have no way of determining how old these are, so while we are including the original batteries, we are not able to guarantee that the batteries still work.
This kit also includes:  1 Receiver, 1 Antenna, 1 Camera Hot-Shoe Adapter, 1 Miniature Plastic Shure Flat-head Screwdriver, 1 Manual & Carry/Storage Bag
Condition:                    New Old Stock
Frequency:                   175.000MHZ
VP3 RECEIVER SPECS:
RF Sensitivity:                                      -109 dBm (0.8 µV for 12 dB SINAD typical)
Image Rejection:                                  50 dB typical
Spurious Rejection:                             65 dB typical
Signal to Noise Ratio:                          87 dB (1 mV RF input, 1 kHz modulation, ±15 kHz deviation)
Squelch Quieting:                                87 dB, A–weighted
Ultimate Quieting:                                87 dB (–40 dBm RF input)
Mic Level Audio Output:                       –36 ± 5 dBV typical, 600 O,
(fixed level, ±15 kHz deviation input, 1 kHz test tone).
Monitor (Headphones) Output:             80 mW at 100 mA, 3% THD
Power Requirements:                           9 V alkaline battery or
12 Vdc (at 100 mA load) through external coaxial jack.
Battery Life:                                          7 hours (typical)
Dimensions:                                         4.9 in. H x 2.375 in. W x 0.875 in. D
(excluding antenna)
VP3 Receiver FEATURES AND CONTROLS:
1) Antenna: Receives RF signals from the transmitter. Pivot the antenna as required
to maintain vertical orientation
2) Belt Clip: Allows the receiver to be worn on a belt or waistband. The clip can be
removed when the hook–and–loop (VELCRO type) mounting strip or “shoe”
adapter is used
3) 12 Vdc Power Input Connector: Accepts 12 Vdc power from any well–filtered 12
Vdc (at 100 mA) power supply
4) Headphones Output Connector: Insert headphones mini–plug (stereo/mono
compatible) into this connector to monitor the audio signal
5) Headphones VOLUME Control: Rotate this knob to increase or decrease the
headphones output level
6) Battery Compartment: Hinged cover on provides access to the battery
7) Audio Output Connector: 3–pin miniature connector provides balanced output
to video camera or audio mixer
8) AUDIO PEAK Indicator: Red light indicates audio overload. During normal operation,
the light flickers only on loud signals. See Audio Gain Adjustments section
9) POWER/RF Indicator: Green POWER ON light glows when the receiver is turned
on. An orange light indicates that an RF signal is present
10) OFF/ON Switch: Turns the VP3 receiver on and off
11) Squelch Control: Mutes the receiver when no signal is received. Use the supplied
screwdriver to adjust the squelch level. See Changing Receiver Squelch Settings.
English – 8 – English
Certifications:
T1, T2: FCC Accepted under Parts 74 and 90 (U.S.A.); IC Certified TRC–78 (Canada)
EC1, EC2: FCC Accepted under Parts 74 and 90 (U.S.A.); IC Certified TRC–78
(Canada): MPT 1345, MPT 1350 (UK); BZT Certified (Germany)
We are Veterans sourcing high quality, affordably priced US Government surplus items for introduction to the open market for purchase by both individuals and corporate buyers.
We value the opportunity to earn your business, making customer service our highest priority. If you have questions, comments, or concerns please contact us so that we may help. We make every effort to address emails as soon as possible. However, there are times when it may take up to 48 hours for us to reply
Check out my other auctions
***BID ON MULTIPLE ITEMS AND SAVE ON SHIPPING!!